AUDIO CONTROL
Press the “Audio” button and make sure Patio Audio Control is above the volume controls. There are six source options on Page. 1 and three options on Page 2. Hotel Music 1 is the default choice. The photos indicate that PatioLED Bluetooth is selected and the volume is 69%. There are two wireless mics available. Mic 1 is at 77% volume and On. Mic 2 is at 72% and currently muted. Use the “On” and “Muted” buttons instead of turning the volume down to silence any audio. Patio XLR connection is located with the Bluetooth receiver and HDMI connection on the front of the F&B building. DO NOT ADJUST ZONE AUDIO!!!!!!!!!!!!
EXTERNAL CONNECTIONS
There are three external connections located on the wall of the F&B building to the right of the kitchen door. HDMI (video and audio), XLR audio and PatioLED Bluetooth. For Bluetooth press the button on the wall plate until the blue light flashes. Then connect the device to “Patio BT”. Set the source volume at 60% and use the phone or other device to control the volume as needed.
VIDEO CONTROL
Press the “Video” button and confirm “Video Control” is above the representation of the video wall. There are three pages of sources, but Page.1 will be the primary. Videowall Coolsign is the default source for the videowall. Patio TVs are typically on two different DirecTV sources, typically two different ESPN channels. Select the source then touch the TV or videowall representation to change displayed sources.
2x2 VIDEOWALL
The Videowall can be set to a 2x2 display by pressing the 2X2 Screen Preset button. Select a source and assign it to the quadrant of your choice. This is what this configuration looked like.
CHANGING DIRECTV CHANNELS
Change DirecTV channels by touching the DirecTV button. Select DirecTV 1-4 then one of the preset channels. This provides most commonly needed sports channels. If channels will not change contact Scott or IT.